CATIA V5 (64-bit)

[macduff]

Hello,
I need some help with the following please.
I recently went from a 32-bit OS (XP) to a 64-bit (W7). With that, CATIA V5 software was upgrading from 32-bit to 64-bit as well. Well…..when I try to open CATIA V5 it says there is no license available. See attachments. Our IT guy says CATIA V5 is not talking to the LUM Client (whatever that means).
The 32-bit V5 version still works on the 32-bit OS (XP) on my co-workers workstations, but not on mine. FYI, we have 1 floating license we all share, and do not have tech support.
Thank you in advance,


Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer

 

[DBezaire]

Colin,
What version of V5 are you running?
You need to have LUM Version 4.6.8, Fix Pack 15 installed on the server and client. This is a free download from IBM.

Regards,
Derek

 

[macduff]

I'm sorry Derek....V5R19. Could you please post the direct link for download. Thank you so much!

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer

 

[DBezaire]

This should bring you there but LUM 4.6.8.15 does not exist. There must be a problem on the site because .14 and .13 are not there too.

https://www14.software.ibm.com/webapp/iwm/web/reg/pick.do?lang=en_US&source=lum

It is too big to email but I can upload if you have an FTP site.

 

[macduff]

Let me check with our IT dept on an FTP site.

Thanks a bunch!

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer

 

[DBezaire]

email me Derek.Bezaire at Valiantmachine.com