Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Catia V5 ..Can i create a draw view from a scene?... 1
- Thread starter eamonn955
- Start date
-
1
- #2
Configurator
New member
Yes, that, to me, is the main point of scenes.
From the drafting workbench, chose to make a view like normal. Switch over to your product, and click on the scene before selecting a plane for projection.
It's as simple as that.
If you are in R14+, you will be able to modify drawing links to scenes. Previously, this was not possible.
From the drafting workbench, chose to make a view like normal. Switch over to your product, and click on the scene before selecting a plane for projection.
It's as simple as that.
If you are in R14+, you will be able to modify drawing links to scenes. Previously, this was not possible.
- Status
Similar threads
- Locked
- Question
- Locked
- Question