Catia V5 not showing points 1

[zagarao]

We just upgraded to Catia V5 R21 and in part design it's showing planes about 4 times the size they should be as well as not displaying any points created with GSD
Any thoughts or solutions?

 

[drewmumaw]

@zagarao
I think the size of planes is controlled in Tools > Options. I don't have CATIA open at the moment, but it's probably on the Display tab under the Infrastructure > Part Infrastructure section.

If not, then try the Mechanical Design section of the tree in the Tools > Options window. Lastly, you might try one of the tabs under General > Display.

Regards,
Drew Mumaw

http://www.textsketcher.com/

http://www.drewmumaw.com/

 

[DBezaire]

It could be your view setting.

View - Render style - Custom View - All points.


Win 7
23SP5/24SP3, 3DVIA Composer 2015

 

[itsmyjob]

tools options:

With Pixel Culling >= 3 you wont see point in 3D.

Lower the value to see points.

Eric N.
indocti discant et ament meminisse periti ​

 

[zagarao]

Worked like a charm, thanks guys!

 

[KevinDeSmet]

Damn itsmyjob, that is some funky stuff. You can't tell me that was the intention when Dassault thought of Pixel Culling as a technique to simplify the visualisation process?

 

[itsmyjob]

it does help when you have big assembly with zillions of tiny bits...

Eric N.
indocti discant et ament meminisse periti ​