Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CATIA v5 on dual-processor machine ???
- Thread starter RSth
- Start date
using search I found :
thread560-68675
INDOCTI DISCANT ET AMENT MEMINISSE PERITI
Eric N.
catiav5@softhome.net
thread560-68675
INDOCTI DISCANT ET AMENT MEMINISSE PERITI
Eric N.
catiav5@softhome.net
Configurator
New member
The stress analysis supposedly does, but I haven't seen it do it.
Some of the batch utilities do (DMU Builder).
For the most part (99% of V5), no.
Some of the batch utilities do (DMU Builder).
For the most part (99% of V5), no.
stickybunn
Automotive
RSth
I run V5 on an old Dual Processor PIII machine. Its mainly DMU functions that really use both processors but if i watch the usage graph while using GSD, one is at about 55% the other at 35-45%.
I remember another question on this and someone said "by right clicking on the process in task manager you can increase its priority" or something like that.
Richard![[thumbsup]](/data/assets/smilies/thumbsup.gif "[thumbsup] [thumbsup]")
I run V5 on an old Dual Processor PIII machine. Its mainly DMU functions that really use both processors but if i watch the usage graph while using GSD, one is at about 55% the other at 35-45%.
I remember another question on this and someone said "by right clicking on the process in task manager you can increase its priority" or something like that.
Richard
- Status
Similar threads
