Cell Library

[Mulli]

Can anyone please help me? How do I create a cell library so I can create cells and store them in one place.

Any help much appreciated

 

[gbam]

Use the Help File it will walk you through it.

 

[cad101]

create a dgn eg mycell.dgn with your seed file then in explorer rename mycell.dgn to mycell.cell
and you will now have a empty cell library call mycell
now you use the model copy model etc to make additional cell within the cell library or use the traditional old school pre v8 method of draw, add origin and fence > create cell etc...

 

[JohnCWard]

You can also select "Element > Cells" to open the cells dialog and use the "File > New" command.

 

[RJBPIII]

did you get any help on this?
I finally figured it out, once you get the hang of it I can say it is a really big help

 

[Rich65]

i would like to assist the engineer with the cell building problem, I can add a number of cell with quite eas, but I do even know how to answer questions ? some help would be good............................ Sorry to the fellow.
Mulli (Civil is who I am trying to contact. Perhasps you could call me out a Lucite? Contact John Day and he will put you on to me Richard the drafter/

 

[Mulli]

Thank you all for your help. I worked it out and is much better although Microstation still seems to have a mind of its own sometimes.