Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ceramic Springs? 1
- Thread starter velle
- Start date
Dear velle,
Back in 1994 at the American Ceramic Socity Meeting there was a Japanese Manufacturer that manufacturers ceramic springs at the Vendor displays. The name of the Company was NHK Spring Co., Ltd that made in 1994 silicon nitide springs(both coil springs and flat springs). Their USA address is as follows.
NHK International Corp.
13961 Farmington Road
Livona, Michigan 48154
Phone
313) 427-3300
FAX313) 427-5117
This address is back from 1994 but I hop it points you in the right direction.
Best Regards,
Genesis
Genesis
Back in 1994 at the American Ceramic Socity Meeting there was a Japanese Manufacturer that manufacturers ceramic springs at the Vendor displays. The name of the Company was NHK Spring Co., Ltd that made in 1994 silicon nitide springs(both coil springs and flat springs). Their USA address is as follows.
NHK International Corp.
13961 Farmington Road
Livona, Michigan 48154
Phone
313) 427-3300FAX
313) 427-5117This address is back from 1994 but I hop it points you in the right direction.
Best Regards,
Genesis
Genesis
-
1
- #3
Two articles that you might find interesting are:
Both have information on ceramic springs
Both have information on ceramic springs
JimMetalsCeramics
Materials
They're fine if you don't have high impact. If so, you machine springs out of graphite and C-C.
- Status
Similar threads
- Locked
- Question
- Locked
- Question