Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
chain reduction
- Thread starter cni76
- Start date
GregLocock
Automotive
You are probably best to draw it out full size and measure it. But that isn't the answer you wanted!
Decide on your chain link length. Decide what gear ratio you want (R). Choose appropriate number of teeth for small diameter chainwheel (at least 11). The large one will have R times as many teeth . work out their diameters (=no. of teeth*link length/pi). The distance between the wheels has no effect on the ratio, but if they are too close then you won't get enough wrap on the small cog.
Cheers
Greg Locock
Decide on your chain link length. Decide what gear ratio you want (R). Choose appropriate number of teeth for small diameter chainwheel (at least 11). The large one will have R times as many teeth . work out their diameters (=no. of teeth*link length/pi). The distance between the wheels has no effect on the ratio, but if they are too close then you won't get enough wrap on the small cog.
Cheers
Greg Locock
everything you need to know about chain drives is on
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question