Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

charge cooling

Status
Not open for further replies.

Vapo

Automotive
Dec 6, 2002
3
0
0
GB
wondering if anyone's heard about the cryogenic system that uses CO2 to cool aair as it enters the intake manifold....I found a site on the internet that sold the system but been searching like mad and cant find it again....HEELP !!
 
Replies continue below

Recommended for you

I have heard of LIQUID propane being injected upstream for use as charge cooling. PWM control with a tfe valve. The stuff looks blue. Problem is its only good for drags. The tank freezes up and discharge pressure drops to zero.
 
You should read some points in another thread called fuel Temperature. IT will offer some additional thoughts for you to add to yours.

Shaun TiedeULTRADYNE Arl,TX(stiede@ev1.net)
 
Status
Not open for further replies.
Back
Top