Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Cheap experimental modal analysis system

Status
Not open for further replies.

vozgul

Automotive
Sep 27, 2000
28
0
0
TR
Hii,


I need a cheap experimental modal analysis system which is working on PC. I would like to use miniature accelerometer and microphone connected to PC and a small shaker or impact hammer for exication.

1)Which software can you advise?
2) What kind of a connections/cards should I use on PC?
3) Other advises?

Thanks a lot.
 
Replies continue below

Recommended for you

Vozgul,

1) Software: Dasylab of National Instruments (free demo available that can do the trick)
2) Hardware: Daq Pc-card, make Iotech
3) Many others ;)
 
Have you thought of using quadrature picking ?

For say 20 points and 3 modes, it is very practical and you don't need software, just a force hammer and an accel or, two accels.



 
Status
Not open for further replies.
Back
Top