Rock8104
Mechanical
- Feb 3, 2014
- 3
Newbie Here...
We have a Check Valve and a Strainer for our Cooling Tower deluge system that need replaced. My maintenance group purchased some off of McMaster. My question is if there is any "certification" for these items that they have to have before being placed into a Fire Protection System. I was looking at NFPA 13 Sections 7.3 and 6.7 but neither of them had any requirements listed in there. This is my first time really dealing with Fire Protection so any direction would be appreciated and sorry if the I have terminology mistakes in my question.
Thanks,
Rock
We have a Check Valve and a Strainer for our Cooling Tower deluge system that need replaced. My maintenance group purchased some off of McMaster. My question is if there is any "certification" for these items that they have to have before being placed into a Fire Protection System. I was looking at NFPA 13 Sections 7.3 and 6.7 but neither of them had any requirements listed in there. This is my first time really dealing with Fire Protection so any direction would be appreciated and sorry if the I have terminology mistakes in my question.
Thanks,
Rock