Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Circuitworks help

Thread starter DHALE1
Start date Apr 21, 2004

Status: Not open for further replies.

Apr 21, 2004

DHALE1

Mechanical

Has anyone used Circuitworks to import an ascII file from pads software. I was able to import a board, but had to input all the component heights when I brought it in. We were wondering if their is a place in pads to enter component height. Any tips would be great.

Thanks