Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cleaning Air ducts for Penicillin plant 1

Status
Not open for further replies.

juan2025

Chemical
May 3, 2001
9
Hello dear members

Does anyone know, a procedure or regulation to clean and sanitize HVAC ducts for a plant Penicillin based products?

Thanks in advance for your answer

J2025
 
Replies continue below

Recommended for you

Vaporized Hydrogen Peroxide deactivation system(VHP generator) can be a solution. These are widely used along for decontamination and deactivation of Isolators when used with high potent substances(for ex. cytotoxic medicines)

Check
Regards,
 
For simple duct cleaning try HVCA TR17 (UK) code of practice. This gives methods of cleaning and recomendations for access door intervals etc. I assume that when handling nastys like penicillin, you will have to filter the air entering the space to a suitable clean room level.

I'm not sure about the exhaust though...possibly provided the concentration os low enough and the discharge arranged for high level, you might get away with it on the discharge side.

Incidently our local regional hospital has a drug manufacturing facility and they do just that..filter supply air in, but don't bother filtering on the discharge??

Friar Tuck of Sherwood
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor