Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Closed head foam water sprinkler 1

Status
Not open for further replies.

VNfire

Mechanical
Jun 28, 2016
8
Use Manufacturer?
 
Replies continue below

Recommended for you

Viking has foam stuff. We use them in military hangars.
Chemguard and Tyco are often together. I've used them in private and military hangars.

This stuff is quite specialized. If you mess up, the mistakes are very costly.

Travis Mack
MFP Design, LLC
"Follow" us at
 
I HAVE FOUND IN DATASHEET(Viking-Tyco) WITHOUT FIRST TO SAY THAT CLOSED HEAD FOR FOAM? THEM FIGHTING FOR WATER? I've used them in Car Parking.

I dont know English very well
 
No offense, but this project sounds like it may be above your experience level. You may be best served to hire a professional that can help guide you through the foam/water protection schemes. Mistakes with this stuff can get very costly.

Travis Mack
MFP Design, LLC
"Follow" us at
 
I HAVE DESIGNED DRAWING, I NEED TO BUY THIS TYPE FOAM SPRAY HEAD (CLOSE HEAD) BUT DO NOT KNOW WHAT KIND, HAVE PREVIOUSLY USED FOAM CHAMBER, OPEN HEAD BUT CLOSE HEAD IS NOT USED.
YOU MAY ONLY USE MY of which company? WHICH MODEL?
TÔI ĐÃ CÓ BẢN VẼ THIẾT KẾ DO BÊN KHÁC THIẾT KẾ, TÔI MUỐN MUA ĐẦU PHUN FOAM KIỂU ĐÓNG,TRƯỚC ĐÂY TÔI ĐÃ DÙNG FOAM CHAMBER, OPEN HEAD NHƯNG CHƯA DÙNG CLOSE HEAD BAO GIỜ.
CÁC BẠN CÓ THỂ CHỈ CHO TÔI DÙNG CỦA HÃNG NÀO? MODEL NÀO?
THANKS!

I dont know English very well
 
The closed sprinkler head you will use depends on what foam system you purchase.

If you use a Buckeye Foam system then you will use a Reliable automatic sprinkler because a Reliable sprinkler is what is specifically listed to be used with a Buckeye foam system.

For a Chemguard system you will use a Tyco sprinkler because the Tyco sprinkler is what is listed for use with the Chemguard system.

What you do is select your foam system first and then apply the appropriate sprinkler that is listed to be used with that particular brand of foam system.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor