we are planning to retrofit our old Vertical Turn-Mill with Siemens 840D. The mill spindle of this machine gives only 1000 RPM (max) and so we have a problem with cutting speeds (and feeds). We would like to replace this with a full CNC B-axis add-on to the spindle. This accessory is made by several companies. But this wont solve our problem of low cutting speeds. We would like to have a B-axis with electro-spindle. Does anybody have such an accessory?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CNC Swivel Head with High Speed Spindle
- Thread starter rakes
- Start date
ncprogrammer
Aerospace
- Mar 22, 2003
- 33
- 0
- 0
You may give this company a try, they seem to
be flexible on design and retrofitting...
Good luck
be flexible on design and retrofitting...
Good luck
ncprogrammer
Aerospace
- Mar 22, 2003
- 33
- 0
- 0
sorry, forgot to add the information!!!
Ryan Mathison
President
Specialty Design Engineering, Inc.
401 N. Lombard St.
Oxnard, CA 93030
Phone: 805-278-2633
Fax: 805-278-2654
Ryan Mathison
President
Specialty Design Engineering, Inc.
401 N. Lombard St.
Oxnard, CA 93030
Phone: 805-278-2633
Fax: 805-278-2654
- Status
Similar threads
- Locked
- Question