DudePipeliner
Mechanical
- Jul 7, 2009
- 8
the coating breakdown coefficients (a and b) in DnV-RP-B401 where in order of 0.1 and 0.01.
these coefficient are remained unchanged in new revision of B401.
on the other hand, the DnV-RP-F103 proposes very different coefficients, which are in order of 0.001 and 0.0001; which leads to very light anodes.
What is the problem? It doesn't seem to be correct and I smell a rat in this approach???
these coefficient are remained unchanged in new revision of B401.
on the other hand, the DnV-RP-F103 proposes very different coefficients, which are in order of 0.001 and 0.0001; which leads to very light anodes.
What is the problem? It doesn't seem to be correct and I smell a rat in this approach???
