color library 2

[troy06]

Using Wildfire 2.0,how can I make a library of all of the colors I want and then have that library be availible for every part I design?

 

[cadcamguy]

you can get color map file over at mcadcentral

http://www.mcadcentral.com/proe/fil...ategoryid=44&text=&imageid=1241&box=&shownew=

from a regular here...and then if your only running on one machine it can be where your

config.pro lives.. start in dir

I just have the appearance.dmt file in my start dir and works fine

 

[eholmes]

WF 2.0 and 3.0 now use the APPEARANCE.DMT file for colors. Both versions will read previous COLOR.MAP files and save those as the APPEARANCE.DMT. You can save the .DMT files on your local drive or a network directory but you must set the PRO_COLORMAP_PATH in your config.pro and point to the directory/folder where it is located. For example my config setting looks like this: PRO_COLORMAP_PATH c:\colormaps\


Eholmes

 

[dgallup]

I can not get Pro/E to follow the pro_colormap_path but it will read a file in the startup working directory.