Communication Power Focus 6000 & Compactlogix L30ER

[JonathanGHMO]

hi.
im interested to do a communication with my PLC Controller AB to Atlas Copco PF 6000.
i have an ABCC-EIPT-2P Article: AB6539-B Serial: A05C89C8. and the EDS too. (Downloaded since Hms Page).
My problem is that idk how can i set up my Input Size and output, my progress is: I've installed IpConfig and Anybus configuration manager, but i dont have idea how can i do this step... i was watching others themes similar HMS foro but i cant advance to the next step yet.

this is what i have: Ethernet Cable, Atlas copco PF 6000 and Laptop, Anybus CC module.

 

[TheRooster55]

I am in need of that EDS file, can't find it anywhere. The EDS file should allow you to create a module in an AB PLC which will automatically set up comms to the power focus. I am not sure exactly, haven't worked with these devices yet. I will know more once I see the module and may be able to answer your questions.

 

[LionelHutz]

Have you talked to Anybus about it?

 

[TheRooster55]

I was able to get one from the Atlas distributor, unfortunately it seems like the way to communicate with it is through messages with their open protocol? The only info on the Anybus device is whether it's connected or not, I was hoping for something PF6000 specific.