Aug 31, 2005 #2 metengr Materials Oct 2, 2003 15,478 If you are referring to UNS N08811; Incoloy 800H 30-35 w/% Ni 19-23 Cr 39.5 min Fe 0.06-0.10 C 0.25-0.60 Al 0.25-0.60 Ti Upvote 0 Downvote
If you are referring to UNS N08811; Incoloy 800H 30-35 w/% Ni 19-23 Cr 39.5 min Fe 0.06-0.10 C 0.25-0.60 Al 0.25-0.60 Ti
Aug 31, 2005 Thread starter #3 Eabrar Mechanical Jul 31, 2003 59 Thnaks metengr Can u please give me some comparison b/w UNS No8810 and UNS No 8811. Thanks again. Upvote 0 Downvote
Aug 31, 2005 #4 metengr Materials Oct 2, 2003 15,478 See below. Open the file to review the information. http://www.specialmetals.com/products/incoloyalloy800h&ht.htm Upvote 0 Downvote
See below. Open the file to review the information. http://www.specialmetals.com/products/incoloyalloy800h&ht.htm
Aug 31, 2005 Thread starter #5 Eabrar Mechanical Jul 31, 2003 59 THANKS DEAR METENGR U HAVE ALWAYS VERY HELPFUL TO OTHERS TAKE CARE Upvote 0 Downvote
Sep 1, 2005 Thread starter #6 Eabrar Mechanical Jul 31, 2003 59 ONE MORE THING! AFTER STUDYING THIS ARTICLE BY SPECIAL METALS, I HAVE A CONFUSION. WHAT IS THE DIFFERENCE B/W UNS NO 8810 AND UNS NO 8811 IN TERMS OF MECHANICAL AND PHYSICAL PROPERTIES? WHICH ONE IS BETTER IN TERMS OF CREEP STRNGTH? IS THERE ANY HARM IN WELDING AN OLD TUBE(UNS 8810) OF DIA 42mmx7.9mm thk WITH NEW TUBE(BUT OF UNS 8811) OF SAME DIMENSION? THANKS. Upvote 0 Downvote
ONE MORE THING! AFTER STUDYING THIS ARTICLE BY SPECIAL METALS, I HAVE A CONFUSION. WHAT IS THE DIFFERENCE B/W UNS NO 8810 AND UNS NO 8811 IN TERMS OF MECHANICAL AND PHYSICAL PROPERTIES? WHICH ONE IS BETTER IN TERMS OF CREEP STRNGTH? IS THERE ANY HARM IN WELDING AN OLD TUBE(UNS 8810) OF DIA 42mmx7.9mm thk WITH NEW TUBE(BUT OF UNS 8811) OF SAME DIMENSION? THANKS.
Sep 1, 2005 #7 metengr Materials Oct 2, 2003 15,478 Eabrar; By the nature of your questions, I would suggest that you contact Special Metals via phone or email. They have an excellent support staff that will answer all your questions about 800H and 800HT. I have dealt directly with these folks. Upvote 0 Downvote
Eabrar; By the nature of your questions, I would suggest that you contact Special Metals via phone or email. They have an excellent support staff that will answer all your questions about 800H and 800HT. I have dealt directly with these folks.
