Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Compost Silo Fireproofing

Status
Not open for further replies.

RaccoonV

Mechanical
Sep 15, 2021
4
Hi,
I'm currently working on a project for fireproofing a compost Silo. The fireproofing is supposed to be done using gas nitrogen. I am just trying to know what the nitrogen flow needs to be to prevent the compost material from catching fire. The current dimensions of the silo are 620 m3. Does anyone have experience with this?
 
Replies continue below

Recommended for you

"silo inerting systems"

"SILO inerting" NFPA
 
These systems usually have some oxygen detectors as safety.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
Using nitrogen to insert a tank is more complicated than simply providing sufficient flow. Nitrogen is not heavier than air and does not displace air in the same way that CO2 would, for example. Here is an article that mentions the use of computational fluid dynamics to design nozzles that aid in the mechanical removal of air and methane.


I believe this is very relevant to your question.
 
If you take away oxygen from composting stuff then you drive the process towards anaerobic decomposition.

And that produces methane.

Are you sure?
 
Composting in a silo will be anaerobic. Without motion any oxygen in the compost will quickly be consumed turning the process anaerobic.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor