Thursday at 9:27 AM #1 C Chacheyyy Civil/Environmental Feb 20, 2025 2 To avoid chipping the bored pile head is it possible just to let the concrete overflow to remover the dirt of the concrete?
To avoid chipping the bored pile head is it possible just to let the concrete overflow to remover the dirt of the concrete?
Thursday at 2:37 PM #2 BridgeSmith Structural May 22, 2009 5,019 That's how it's normally done for the drilled shafts installed for us. They pump it in and let it overflow until there's no water or contaminants in the concrete where it interfaces with the foundation or is finished smooth. Upvote 0 Downvote
That's how it's normally done for the drilled shafts installed for us. They pump it in and let it overflow until there's no water or contaminants in the concrete where it interfaces with the foundation or is finished smooth.
Yesterday at 12:56 AM Thread starter #3 C Chacheyyy Civil/Environmental Feb 20, 2025 2 What do we call on that procedure? and is it applicable in the philippines Last edited: Yesterday at 1:02 AM Upvote 0 Downvote
