Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete test record software

Status
Not open for further replies.

Rjeffery

Civil/Environmental
Sep 15, 2002
332
0
0
US
Does anyone have recommendations for software to keep records of break data in the lab environment?
 
Replies continue below

Recommended for you

Look at Humboldt Mfg. Call and talk to Mahir Nadaf
551-D Pylon Drive
Raleigh, NC 27606 X221
Bus: +1 (800) 537-4183
E-mail: mahir@ehumboldt.com

Tell him that I referred you to him and he will connect you with the right softwear and a demo copy. Tell him you are evaluating softwear. The cost is about $750, now there is other but This is the most cost effective.

Bob Smith
 
I have a Rebound Hammer (Swiss Hammer) and It's not calibrated. In the verification in Anvil, it should read 84, and it read 80.23 (average).

How do I do the correction to accurate reading?
 
Status
Not open for further replies.
Back
Top