Connecting 240mm2 cable to 160A circuit breaker

[AusLee]

Hi,

A 3 phase cable with 240 mm2 cross section for each of the phases is required to connect to a 160 A circuit breaker.

The cable is too large (2.2 x the cross section of AWG 0000 (4/0)), and the terminals on the circuit breaker do not fit.

What accessories would be a good 100% legit (not ad-hoc fix) to make this connection?

 

[TestMonkey]

Pin terminals. Several manufacturers are producing these.

 

[7anoter4]

See:

http://ecat.burndy.com/Comergent/burndy/documentation/section c-compression.pdf

section C148 adapter Y3428R From 500 mcm to 4/0

 

[AusLee]

Thanks we decided to use Flexible Busbars.