Constant Load

[aseth40]

Hey,
I want to have a constant pressure load of say 1 N/mm2 throughout all the steps and then have a pressure gradient of say 0.5 N/mm2 in one step and then -0.5 N/mm2 on same surface in other step. Important thing here is to have a constant 1N/mm2 load all throughout.

Another thing, by gradient I mean that my pressure will go from 1 to 1.5 N/mm2 in one step and the back to 1 from 1.5N/mm2 in second step.

Can anyone suggest me something. Would be a great help.

Thanks in advance!!!!

 

[Mustaine3]

What's the problem? Just define that in your steps.
Or use an amplitude with relation to the total time.

Request field output P to check the load in postprocessing.