pwr2020
Mechanical
- Apr 30, 2012
- 6
Might anyone be able to shed some light on this error message? Shows up during a static analysis, before the solver even starts.
Thanks
Thanks
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Contact Elements out of range?
- Thread starter pwr2020
- Start date
- Status
Sorry, it's been a while since I checked in here.
I would look in the .out file to see which contact elements where giving trouble and then try to find them in the model.
TOP
CSWP, BSSE
Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."
I would look in the .out file to see which contact elements where giving trouble and then try to find them in the model.
TOP
CSWP, BSSE
Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."
- Status
Similar threads
- Locked
- Question