Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Contact X Buckle Analysis 1

Status
Not open for further replies.
Replies continue below

Recommended for you

Sort by date Sort by votes
A buckling analysis only calculates mode shapes and as such the displacements have no real meaning to enable contact. You'd have to do an analysis with a local imperfection and increasing loads to determine the buckling load and to have contact in any real sense.

corus
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kamyar_K
  • Locked
  • Question
Contact Interaction and Gravity
Replies
3
Views
97
FEA way
FEA way
AC1999
  • Locked
  • Question
Contact control automatic stabilization 1
Replies
9
Views
112
FEA way
FEA way
ZohrehA
  • Locked
  • Question
Contact
Replies
11
Views
96
ZohrehA
ZohrehA
robertt3
  • Locked
  • Question
What's the default contact damping value in ABAQUS/Explicit
Replies
6
Views
77
Marekcom
Marekcom
FEA_User
  • Locked
  • Question
Heat transfer analysis with abaqus
Replies
5
Views
30
FEA way
FEA way
Back
Top