Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Content Centre

Status
Not open for further replies.

kisspepe

Computer
Joined
Dec 7, 2009
Messages
4
Location
HU
Hi everyone,

There's a network in school with inventor content centre and 3 classes with computer, and there are 2 classes where the inventor server offens to connect tothe Content Centre from menu, but in the 3nd class it doesn't offen this.

Reinstalling Inventor didn't solve the problem, but reinstalling the computer solves the problem. Has anybody seen this problem? How cant this problem be solved without reinstalling the computers.

I atlached a picture about my problem. The picture from the hungarian Inventor 11.

Thank you for your help.

Bye
 
For a start your school shouldn't be on such an old version. Isn't that supplier content, not content centre in your picture. I can't check because I don't have R11 installed anymore. What do you mean by reinstalling the computer? On the network, OS?
 
the network is working fine, so there is no network problem.
 
So you have to reinstall when you reinstall the OS, so how do you know that it wasn't installed incorrectly in the first place?

Have you tried to log into ADMS?

Why not upgrade anyway? Your students learn nothing from old technology, they will be so far behind when they get out that they will have to learn the program all over again. Bad for employers but worse for the students prospects.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top