Control Valve Sizing

[syed2345]

Hello Everyone.

We recently got a project in which we have to put a bypass n control valve from pump suction to discharge side.. because the pressure is high. 8700Kpa. So the client doesn't want the pump to bear that pressure on start up from 0 to 8700kpa.currently they are doing it manually by putting one operator in field and one operator in the control room.. your inputs will be really valuable sir. As I'm a fresher. Working as a piping engineer but I have a degree in chemical engineer.

 

[TD2K]

It's not clear what your question is.

 

[stanier]

You will need a severe service valve for the pressure drop of this magnitude. Suggest you get onformation on CCI, VTI or Copes Vulcan valves.

“The beautiful thing about learning is that no one can take it away from you.”
---B.B. King

http://waterhammer.hopout.com.au/

 

[dom2508]

Hi Syed,
I represent a severe choke valve company, Duxvalves, and would welcome the chance to resolve your issue.
Kind regards,
Dominic