PRuggiero
Mechanical
- Oct 8, 2007
- 64
hey guys, i am working on a device that will be placed on the hot coolant hose that goes into the radiator. So the hose will be split and the device put in between. I am modeling this in flow works. The problem I am having is all I know is the coolant velocity in the hose. I need a pressure to get flow works to run the simulation and I know the coolant system is under pressure, around 15psi. But it seems that I need a pressure differential between the inlet and outlet of this device. I don't understand how there would be a pressure differential between the inlet and exit of my device. Any help is appreciated.
thanks,
pete
thanks,
pete