Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cooling water Quality

Status
Not open for further replies.

athip

Mechanical
Oct 17, 2007
6
I am working with Electric Power Plant.I have to know about
Cooling Tower water quaility standard such as circulating water and make up water and comply with any international Std . Could anyone give me information or recommendation ? Thank a lot
 
Replies continue below

Recommended for you

The quality requirements for cooling water used in a cooling tower are specified by the cooling tower manufacturers. They tend to use their own specification and not International standards. They also tend to ask for the composition of your available water and design the cooling tower for that particular quality of water, ignoring again the International standards. By the way, I have never heard of an International standard or the like to specify the minimum requirements for the cooling tower water, perhaps someone would know better then me...
cheers,
gr2vessels
 
nothing i know of aside from the OEMs reccommendations, but you can check out the Cooling Tower Institute publications for more info


Steven C
Senior Member
ThirdPartyInspections.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor