Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Copy views from one drafting file to another drafting file

Status
Not open for further replies.

globalengg3012

Automotive
Jul 31, 2012
7
can the views from one drafting file be copied/moved to another drafting file without having link to the model or without copying model using Siemens NX 7.5
 
Replies continue below

Recommended for you

You can use 'Copy & Paste' but without the underlying model being the mast for the new drawing there will not be anything to actually 'Copy'.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
Maybe tell us what you are trying to ultimately accomplish, and we may have a suggestion for you to get there a differnt way.
 
I have a file which has both model and drafting, but the main issue is with the drafing.
On the drafting sheet tabular note is missing and some views has to be corrected/Manipulated, but this cant be done on original file.
i came to know that without having link to the model the drafting views cannot be generated and after saving also to open it has to be linked inorder to open..

can you suggest me the best method to acccmplish this...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor