Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Siemens NX Drafting - Reset the "Border to Arrow Distance"

Status
Not open for further replies.
Asieros

Asieros

Industrial
Mar 9, 2009
1
Hello everyone. In a 2D drawing, I have a section view of a component and I manually moved the Arrow line from one of the ends. The "Border to Arrow Distance" controls the distance between the section line arrow segments and the geometry box enclosing the part. Is it possible to return to the default value indicated in "Border to Arrow Line Distance"? Once I have moved the arrow line manually, it no longer adapts to the geometry box enclosing the part. This is a Template and needs to be adapted to different component sizes, recreating the section and all the views depending on it would be very painful.

2024-10-02_17_10_29-Window_nyqbfp.png
 
Status
Not open for further replies.

Similar threads

P
  • Question
Part Family Siemens NX & TC synchro issue
Replies
1
Views
1K
Piotrek947
P
MANox
  • Locked
  • Question
Change tabs bar posiotion to "centered"
Replies
2
Views
264
MANox
MANox
Anton Liubimov
  • Locked
  • Question
NxOpen, How to programmatically open a dialog box "Extrude"
Replies
2
Views
486
Anton Liubimov
Anton Liubimov
DDerek
  • Locked
  • Question
How to make "Balloon" Result in only the number for the callout
Replies
3
Views
292
SDETERS
SDETERS
CADologist
  • Locked
  • Helpful tip
NX Journal - Assign Material to All bodies in part; Assign Description to "Description Attribut 1
Replies
0
Views
409
CADologist
CADologist

Part and Inventory Search

Sponsor

Back
Top Bottom