Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

corrosion of aluminium -cause?

Status
Not open for further replies.

dragstrut

Structural
May 20, 2017
7
i was out at a building recently. i practice in structural engineering of aluminium components, though i am not a specialist expert in corrosion related matters.

I saw aluminium corroding like the below images.

it appears the stone immediately adjacent to the aluminium is attacking the aluminium?

this was approx 500metres from the sea. A sheltered harbour, behind some rolling hills, not exactly "inland", but nowhere near breaking surf or too much airborne salts i would imagine...

this worries me a bit as in my practice, we often mount ceramics on aluminium rails, even sometimes consider mounting natural stone near aluminium, i never believed corrosion was an issue for aluminium in my applications, this has me second guessing things..

20240605_115125_rqm9ln.jpg
20240605_115128_udutgo.jpg
20240605_115131_vvr5ee.jpg
 
Replies continue below

Recommended for you

500m is considered near the shore.
Salt mist and fog is carried in, it condenses on your structure and then runs down into the stone.
I would wager that if you picked up some of those stones, rinsed them with DI water and then analyzed for Cl you would see big numbers.
It looks like the stone has damaged the surface coating on the Al.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
Thanks for the response @EdStainless

would this be the combination of the chlorides, with the alkalinity of the stone?

as Aluminium is typically fine in salt laden environments. in my experience, in saline environments, even uncoated aluminium will usually form a surface rust (patina) which safeguards against further corrosion
 
Al alloys do not like to sit on alkaline concrete and stone in moist conditions. Add on the Cl from its proximity to the ocean and conceentration thereof from alternate evaporation/condensation cycles and you have the perfect recipe for the corrosion observed.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor