Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Corrosion resistance of Inconel 718, Inconel X750 and Incoloy A286 with dilute sulphuric acid at 70C

Status
Not open for further replies.

ballvalveguy

Petroleum
May 12, 2007
30
I am aware that these three metals are not great with sulphuric acid, but I need to specify a spring material that will work in this application. I picked what I consider to be probably the best choices, but if anyone can give me some insight in to which would be the best material to use, I'd appreciate it.
 
Replies continue below

Recommended for you

How dilute?
Have you gone to the Special Metals web site and looked at the data sheets for these alloys?

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy
 
NiDI

"Everyone is entitled to their own opinions, but they are not entitled to their own facts."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor