We have 6061-T6 aluminum parts that we need to cool with DI water and we've been seeing corrosion issues. Currently we control the lower end water resistivity, but not the upper end. Are there any guidelines for corrosion rates versus resistivity that we can use to minimize this issue?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Corrosion vs DI Water Resistivity
- Thread starter dvash
- Start date
Similar threads
