Oct 20, 2023 #1 anazem Mechanical Oct 20, 2023 3 0 0 CA Could you please chare Excel file for torque calculation of the gland which installed on the tube ?
Oct 20, 2023 #2 drawoh Mechanical Oct 1, 2002 8,860 0 0 CA anazem, Which gland in which tube? Have you read your vendor literature, or talked to them? -- JHG Upvote 0 Downvote
Oct 20, 2023 Thread starter #3 anazem Mechanical Oct 20, 2023 3 0 0 CA Bore of the tube is 4'', thread of the gland is 4.125'' Material of the tube: 1020 and gland 1045 Lenght of the thread is : 0.875'' Upvote 0 Downvote
Bore of the tube is 4'', thread of the gland is 4.125'' Material of the tube: 1020 and gland 1045 Lenght of the thread is : 0.875''
Oct 21, 2023 #4 dik Structural Apr 13, 2001 25,564 0 36 CA Is there an excel program for this? I'd like to see how it's done, if someone has one. -----*****----- So strange to see the singularity approaching while the entire planet is rapidly turning into a hellscape. -John Coates -Dik Upvote 0 Downvote
Is there an excel program for this? I'd like to see how it's done, if someone has one. -----*****----- So strange to see the singularity approaching while the entire planet is rapidly turning into a hellscape. -John Coates -Dik
Oct 23, 2023 #5 MintJulep Mechanical Jun 12, 2003 9,806 1 38 JP Do you mean something like this? http://www.jilinpipe.com/Products-details?product_id=85&brd=1 Upvote 0 Downvote
Oct 23, 2023 Thread starter #6 anazem Mechanical Oct 20, 2023 3 0 0 CA Something like this chat, https://www.eng-tips.com/viewthread.cfm?qid=216216 Upvote 0 Downvote
