Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Crack near a window

Status
Not open for further replies.

ateestructural

Structural
Jun 10, 2016
17
I'm sorry but I shall be happy if anyone can help me.

IS it true, that if there is a crack near a window, then structurally, the length of the crack = actual length of the crack + length of the diagonal of the window.

I'm not sure, if / how this is true?
 
Replies continue below

Recommended for you

I suppose you could construe that, but I would only go there if the crack along the same diagonal was present on both sides of the window. Otherwise, no.

If I might ask, why is this an issue?

Mike McCann, PE, SE (WA)


 
Seems to me that the material as well would make a difference. Concrete with rebar around the window opening would count more to the "no" side. Basic framed wood wall would be more to the "yes".

Please remember: we're not all guys!
 
msquared48;

Why do you say "yes" if the crack is along the same diagonal was present on both sides of the window?

I'm not able to understand why you say "yes"?

 
Because if the crack presents itself on both sides of the window, then the crack goes through the window.

If it is only evident at one side of the window, then it stops at the window.

It's that simple.

Mike McCann, PE, SE (WA)


 
Why is the apparent crack length of concern as opposed to the actual crack length?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor