Creating area from two different circles.

[prabha21]

i want to create a cone. i have made two circles of different radius, now by joining lines through these two circles or some manner i want to create an area, can anybody help me how to do. since i want to control my mesh in a particular section i am doing in this way instead of using direct cone creation. here is the script file. pls help with this.

/CLEAR,NOSTART
/GRA,POWER
/PREP7
ET,1,SHELL93
R,1,0.00125,0.00125,0.00125,0.00125, ,
K,1,0,0,0
K,2,0,0,1
K,3,0,0,0.5
K,5,0.7,0,0.5
LSTR,1,2
LSTR,3,5
CIRCLE,1,0.35
CIRCLE,2,0.7

 

[0rel]

Hi,

Where is the section for which you want a specific meshing ?

I think the best way to draw your cone without the primitive creation would be to start drawing a line and then rotate it along the cone's axis. But it depends on the said section where you want your particular meshing.

 

[prabha21]

on the surface of the cone i will draw a circle in that i want to control the mesh. anyways i found another way to do it and successfully finished. thanks for your effort and reply

 

[CornishPasty]

Ansys has built in functionality for cone generation

Look up:

CON4
CONE