Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Creating threads 1
- Thread starter mkmech
- Start date
-
1
- #2
Theophilus
Mechanical
Sure. If you search this forum for "threads", you'll find plenty of posts.
Essentially, you'll want to create a helix for a path. Sweep a positive form (such as a triangle or trapezoid, depending on your thread type) along the helix as a path. You'll need to read the help menu for details on making such a sweep.
Good luck.
Jeff Mowry
Industrial Designhaus, LLC
Essentially, you'll want to create a helix for a path. Sweep a positive form (such as a triangle or trapezoid, depending on your thread type) along the helix as a path. You'll need to read the help menu for details on making such a sweep.
Good luck.
Jeff Mowry
Industrial Designhaus, LLC
- Status
Similar threads
- Locked
- Question
- Locked
- Question