Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cruise ship shore power

Status
Not open for further replies.

rovineye

Electrical
Oct 10, 2006
203
0
0
US
I have seen shore power facilities for cruise ships and they typically provide 4 or so cables at 6.6 or 11 kV, and a neutral cable. How is that neutral tied into the ships switchboards? Are they running 6.6 kV with a neutral bus?
 
Replies continue below

Recommended for you

If you are using any wye/wye transformer banks you need a primary neutral.

Bill
--------------------
"Why not the best?"
Jimmy Carter
 
Right, but that is what I am asking. Do they have that arrangement? None of the ships I have worked don have a neutral on the HV bus. Maybe an HRG or reference for earth fault protection?
 
Status
Not open for further replies.
Back
Top