CREERAAM
Mechanical
- Feb 23, 2015
- 109
We are having some CS ASTM A53 Gr.B SCHSTD SSAW service pipes with dents on the body of the pipes happened during the fall of stacks and also a few pipes having out-of roundness towards the ends. Please advise me the standard and accepted practices for the repair of dents as well as the out-of roundness of the pipes with respect to the standards?Is it allowed to carry out repairs for the same? if yes, as per which standard?
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
REGARDS,
G.SRIRAM.
Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action