Custom Cross Hatch Patterns

[Scorch]

I have the need to create some custom cross hatch patterns to be used in some drawings, and can't figure out how to do it. These patterns will be used in an area hatch on drawings. If anybody has any insight on how to do this the help will be much appreciated.

 

[SBaugh]

http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&selm=3ad59577_5@news01.one.net.au

Check out this thread from comp.cad.solidworks it may help you. Also you might want to run a search at

http://www.google.com

in the comp.cad.solidworks newsgroup

Best Regards and I hope that helps you, Scott Baugh, CSWP
credence69@REMOVEhotmail.com

http://www.3dmca.com

http://home.insightbb.com/~scott.baugh/

*When in doubt always check the help first*

 

[aart2]

a good question and also interesting answers.
I would like to have a solid fill pattern, does somebody know what the definition of such a fill would be, so I can add it to the <C:\ProgramFiles\SolidWorks\lang\english\sldwks.ptn> file ?
Aart Schmid