CUTTING IN A HEX HEAD 4

[Dtuck]

What is the easiest way to machine a hex for a 3/16" allen wrench on the head of a stainless steel insert 0.600" long. Precision machining of the rest of the insert is involved so no hammer shots please.

 

[MikeHalloran]

Drill + rotary broach.



Mike Halloran
Pembroke Pines, FL, USA

 

[unclesyd]

Take a look around this site as they have about anything you will need for routine jobs.


If you comeback with more details there could be more options.

http://www.slatertools.com/

 

[Dtuck]

Thank you for the information. It was very helpful. I will be more informed when seeking quotes. Thanks!

 

[Pressed]

EDM is an option.

==========================================
Business Card

http://mech.e.tripod.com

__________________________________________
Cycle Heaven.......

http://www.tailofthedragon.com

 

[Broach]

Machining the hex head in medical stainless steel bone screws is often done with rotary broaching. See some folks who do it at the bottom of the page at:

http://www.rotarybroaching.com