Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DC/AC converter scheme needed

Status
Not open for further replies.

anakin14

Specifier/Regulator
Jul 20, 2003
2
Hello !
I'm looking for a DC/AC 12V/220V converter , " on the table corner " scheme with standart european components !
Thanks !


 
Replies continue below

Recommended for you

Hello m3 ,

I'm looking for a 1200 W continous outpout .
frequency : 50 Hz
If it's possible , can you provide the design of the PCB and the sizing of the radiator .

Thanks !
 
What prevents you from getting a commercial adapter for cars and RVs, that converts from the battery voltage to produce an AC line voltage? these things are probably much cheaper than anything you will try to do yourself. You won't design a 1200-watt on a napkin on the corner of a table, or I don't want to be there when you'll connect it to the battery for the first time.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor