Feb 16, 2014 #1 FlightSim Electrical Nov 19, 2013 26 0 0 GB Hi, how do I set the voltage up for this DC/DC converter,8.5-36Vin,12Vo 15A,180W http://uk.rs-online.com/web/p/isolated-dc-dc-converters/7541438/ I'm looking for an output of 20VDC from an Input of 12VDC. Is there a set of instructions usually for something like this? thanks Paul
Hi, how do I set the voltage up for this DC/DC converter,8.5-36Vin,12Vo 15A,180W http://uk.rs-online.com/web/p/isolated-dc-dc-converters/7541438/ I'm looking for an output of 20VDC from an Input of 12VDC. Is there a set of instructions usually for something like this? thanks Paul
Feb 16, 2014 #2 BrianE22 Specifier/Regulator Mar 21, 2010 1,064 0 0 US Buy the 24 Vdc unit and use the trim option (pages 56-57 of the application notes) to take it down to 20 Vdc. Upvote 0 Downvote
Buy the 24 Vdc unit and use the trim option (pages 56-57 of the application notes) to take it down to 20 Vdc.
Feb 27, 2014 Thread starter #3 FlightSim Electrical Nov 19, 2013 26 0 0 GB Thanks Brian didn't realise there was a set of application notes to compliment the data sheet. Using this it was easy to calculate the SMD Resistor for solder pad mounting on the back to bring it step down to 20VDC I needed. Thanks Paul Upvote 0 Downvote
Thanks Brian didn't realise there was a set of application notes to compliment the data sheet. Using this it was easy to calculate the SMD Resistor for solder pad mounting on the back to bring it step down to 20VDC I needed. Thanks Paul
