DCS process plant historian / log data for centrifugal compressors

[rotw]

Hi,

I need some examples of centrifugal compressor data log / trending (inlet and outlet pressures, temperatures, speed, etc. vs. time) from plant historian / distributed control system (typically DCS/SCADA). This type of plant operation information is are often exploited by diagnostic and troubleshooting team.

Any of the following information would help:

- Data trends screenshots
- Historian in *.csv or excel or in plain tabular format

Of course if it is sensitive information and documents contain data such as client, location, etc. - would you be so kind to provide blurred/anonymous version?

I would greatly appreciate any efforts in this regard. Also any further references, such as technical papers that provide relevant examples would also be welcome.

Thanks again!

 

[pmover]

some years ago, i collected several gas turbine driven compressor data and analyzed several hundred data points at normal operation & startup/shutdown. data was in csv format and i used excel to analyze. see your electronic correspondence used for enlisting in this site.

 

[rotw]

pmover, thanks a lot for this.

I did not receive the file via electronic correspondence, probably it has bounced as spam ?

Alternatively, would you be so kind to upload the file in my dropbox at this link?

Thank you again, It helps and I really appreciate it very much.



If you plan an escape, you must succeed as if you fail, you will be punished for trying. Never say or write down your plan. Heart is the only place where secrecy is granted.

 

[rotw]

Dear members,

Anyone could help me please? some sample field data in CSV format would help me.
If someone has experience as operator and can dig out in their archive folder, I would appreciate.

Thanks in advance.

If you plan an escape, you must succeed as if you fail, you will be punished for trying. Never say or write down your plan. Heart is the only place where secrecy is granted.