Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dear, 1247 3959KZ CPU-P installed 1

Status
Not open for further replies.

Mehboob Ali

Electrical
Aug 4, 2021
3
Dear,
1247 3959KZ CPU-P installed at MWM engine. when tem panel on the cpu does not go beyond five.
kindly tell us what we should do.
Br,
Mehboob
 
Replies continue below

Recommended for you

1247 3959KZ is the correct format foe an MWM drawing, and is probably a CPU.
If the TEM Screen shows a fault, please post a screen shot and we can try and help.
 
Dear,
Nothing is showing on the screen. screen shot attached.

Engine_02_e6v5no.jpg
Engine_02.CPU_kn4pwt.jpg
 
Was the CPU new? Why did the old one fail?

This is probably going to end up wih you contacting MWM or your plat supplier
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor