Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

debugWIRE Device Programming

Status
Not open for further replies.

Erro11

Electrical
Jun 7, 2010
28
One of the listed features of the ATMEL ATMEGA48A-PU microcontroller is that its nonvolatile memory can be programmed via its debugWIRE interface assuming that the DWEN fuse must be programmed via the SPI or Parallel interface before the debugWIRE interface can be used. Most of the programmers/debuggers indicate that debugWIRE can only be used for debugging and not for programming.
1) What programmer can then be used to program the nonvolatile memory through the debugWIRE interface with the least unexpected problems?
2) What is the best programming software and version to perform debugWIRE programming with the least adverse issues? AvrStudio4.18? AvrStudio 6.1? CodeVisionAvr3.06-ChipProgrammer?
 
Replies continue below

Recommended for you

What does ATMEL say?

Dan - Owner
Footwell%20Animation%20Tiny.gif
 
Nothing yet. Their Sails rep nothing trustworthy that consideres real issues yet.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor