I have a Compression spring made of .375" 17-7 stainless steel, and it has to have a 45 degree X 3/32" deep chamfer on the inside diameter. What would be the most suitable deburring tool to use and out of what material? Is it better to have more flutes of less?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Deburring 17-7 Stainless Steel
- Thread starter koza19
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question