Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Definition of Incomer

Status
Not open for further replies.

GOTWW

Industrial
Jan 21, 2004
271
I hear it, and have used it. Do not see it in the power books. What is the cononotation, just an upstream feed to other stuff? (protected by it's own means.)
 
Replies continue below

Recommended for you

Not sure what you are asking, or your application.

By definition, an incomer is just that, an power feed to a switchboard, MCC, or simply an isolator (oops - slapped wrists, I meant to say disconnector or switch-disconnector) on a distribution board

It may typically be an ACB, MCCB, possibly having overcurrent and / or earth-fault protection or possibly just a manual switch disconnector (definition as IEC 60947-2)

_______________________________________
Regards -

Colin J Flatters
Consulting Engineer & Project Manager
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor