Delete Exploded View 1

[rmorgan890]

Using NX 7.5.

I made the mistake of creating an exploded view in one of the predefined views (TFR-TRI 1). Is there any way of deleting the exploded view...Thanks

 

[cowski]

Switch your view to the un-exploded state, then you can use:
Assemblies -> Exploded Views -> Delete Explosion...

If the explosion is used in any drawing views, you may have to delete those before it will let you delete the explosion itself.

www.nxjournaling.com

 

[rmorgan890]

"If the explosion is used in any drawing views, you may have to delete those before it will let you delete the explosion itself."...The drawing view has been deleted.

 

[cowski]

NX will report where a given explosion is used if you go to: Information -> Assemblies -> Explosion, then choose the explosion from the list and press OK.

www.nxjournaling.com

 

[rmorgan890]

Sorry if I wasn't clear. There are no drawing views in this file. The explosion is used in the model view TFR-TRI (my original post incorrectly said TFR-TRI 1). I can't delete system model view TFR-TRI, so I don't know how to delete the explosion...Thanks

 

[Toost]

Read Cowskis first post again

Regards,
Tomas

 

[JohnRBaker]

OK, while in the view of interest (the one you created the explosion in) go to...

Assemblies -> Exploded Views -> Hide Explosion

NOW you can go to...

Assemblies -> Exploded Views -> Delete Explosion...

...select the Explosion item and hit OK.


John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[rmorgan890]

Yes!!! Thanks for the help.